Advanced Bio-Photon Analyzer: How to Use It

I am excited about the results I have seen with the Advanced Bio-Photon Analyzers (ABPA) used to transmit frequencies from FSCANs, F100s, or Rife devices. My colleague, Dale Fawcett, one of the leading educational resources on the FSCAN2 in the United States, after seeing these great results for himself, supports the Advanced Bio-Photon Analyzer to enable anyone to achieve excellent 'remote sessions' either by itself or with Rife, Clark and other modalities. He has some very interesting educational videos on this subject. Give him a call at (360) 598-6585 or email him at innerhealth@comcast.net.

The ABPA is used to transmit the "signature" of an electromagnetic wave to a target. The electromagnetic wave can be the output of any frequency generating device. The usual target is a Polaroid 600 or 5 mega-pixel picture of a person printed out on an HP Inkjet Printer at 1200dpi (or equivalent) on regular paper.

The wire that comes with the ABPA should be connected to an FSCAN or F160 and laid under the input well of the ABPA so the electromagnetic field will extend up into the input well. The ABPA will scan the input well, pick up the "signature" of the electromagnetic field and tranmit it to person in the photo that has been inserted into a slot in the ABPA. If a Rife plasma tube is placed in a room near the ABPA, the electromagnetic field from the plasma tube will be picked up by the ABPA and be transmitted to the target.

The ABPA is a transmission device based on military technology similar to ELF used to communicate to nuclear submarines under water on the other side of the earth. It can reach you wherever you are.

One of the best features of the ABPA is that multiple devices can be used to transmit multiple frequency patterns simultaneously. For example, my EM6C+ plasma tube can transmit one set of frequencies, while my F160 is sending another set, and my FSCAN2 is setting yet a third set of frequencies. In this way, I can sumultaneously deal with multiple conditions.

The output from an FSCAN, F160, or other device should be connected to the ABPA cable which is placed directly underneath the ABPA unit input well. Do not use cables other than the ABPA cable as you will only get about 20% of the effect. Be careful not to put wires or other objects into the input well. The "signature" of the metal on electrodes will be transmitted and may cause negative side effects.

After much experimentation, the switches on the ABPA appear to work best for most pathogens when the Antidote switch is set to Auto, and the Balance switch is set to Auto. The Animal switch should be sent to Animal.

The ABPA reliably and repeatedly transmits frequencies which have the same effect as a contact device. It improves clinical outcomes in 100% of people if used properly and is my preferred mode of using electronic frequencies to kill pathogens.

Plate zapping is very effective with the ABPA and is critical for certain organisms in order to maximize effects in a specific organ system. Simply insert a plate device like the FSCAN imprinter between the frequency generator output and the lead running under the ABPA. Put the appropriate microscopic slide on the imprinter and the electromagnetic field will be "conditioned" so that it affects primarily tissue similar to the tissue on the slide.

As Lao Tsu once said, the best action is no action at all and the ABPA follows that way of thinking. There is no electrical contact, no detectable radiation, no limitation to treatment time, and no wires to tie you down. It is great while traveling and extremely useful for treating for pollen frequencies when running outside during pollen season. I've posted several notes on this web site about how to do this.

With the right hardware setup, the ABPA is as effective as a direct connection via electrodes from an FSCAN or other frequency generator. It it takes a day to knock out a nasty parasite, you can just set it and forget it. It degrades slightly with distance. About 75% of the effect can be felt in Seattle from Boston. Proper hardware setup can more than compensate for this signal loss.

Using remote transmission from a ABPA in conjunction with applying frequencies directly with a Rife or contact device works better than either approach alone. It is essential for difficult cases. The value of the Bio-Photon Analyzer is that it impacts every cell in the body, independent of depth, so it cleans out organisms that may not be affected otherwise. Recurrence can often be prevented.

If you want to try out an Advanced Bio-Photon Analyzer, give Dale Fawcett a call at (360) 598-6585. I would be interested helping anyone in their initial investigations of this intriguing device so we can expand our knowledge base. I have developed an ongoing protocol and haven’t had time to post the many results I’ve experienced and would enjoy hearing results (or help you get results) from other ABPA users whether it’s used with Rife equipment or not.

I've worked with Dale to ensure that anyone using these devices get unparalleled education and support. He provides added value that you cannot get elsewhere in the following way:

1. BPAs have been burnt in twice and work. Because of occasional factory problems, he always does this.  If you get it elsewhere it's possible you may pay more for a unit that looks like it works, yet still have problems.

2. Dale provides more BPA educational video tapes, manuals and a few more weeks of help as you start up. If that's not enough, you can contact me, and for a modest consulting fee, I'll help you get the results you want. I can only do this because Dale provides such excellent support.

3. You can take charge of more of your health protocol for faster results. You do not have to be wired to a device or in the proximity of a plasma tube.

4. Dale charges less than anyone else (no hidden charges) and provides guaranteed service and support. I don't work with anyone else, because noone else I know provides that level of quality.

  posted by Jeff Sutherland @ 6:57 AM